Name: TuneWorks
Author: chrismore

Tools observed via MCP handshake

calculate_race_fuel_and_weight — Plan a race fuel load, reserve, start weight, and projected minimum-weight margin. Calculates from measured inputs without authentication and does not read or s
calculate_gear_ratio_speed — Check speed, RPM, and shift drop from tire size, final drive, and gear ratio. Calculates from measured inputs without authentication and does not read or save a
calculate_tire_pressure_adjustment — Turn cold, hot, and target hot pressures into the next cold pressure to try. Calculates from measured inputs without authentication and does not read or save ac
calculate_corner_balance — Calculate cross weight, left/right balance, and front/rear split from four scale pads. Calculates from measured inputs without authentication and does not read
calculate_spring_wheel_rate — Convert spring rate and motion ratio into wheel rate for setup comparisons. Calculates from measured inputs without authentication and does not read or save acc
calculate_fuel_injector_size — Estimate injector size from horsepower, fuel type, injector count, and duty cycle. Calculates from measured inputs without authentication and does not read or s
convert_afr_lambda — Convert AFR and lambda across gasoline, E85, methanol, and race fuel scales. Calculates from measured inputs without authentication and does not read or save ac
calculate_brake_bias — Estimate front brake bias from piston area, rotor size, and pad friction. Calculates from measured inputs without authentication and does not read or save accou
compare_tire_sizes — Compare tire diameter, circumference, ride height, and speedometer change. Calculates from measured inputs without authentication and does not read or save acco
check_race_alignment — Check camber and total toe against broad autocross and track baseline ranges. Calculates from measured inputs without authentication and does not read or save a
calculate_lap_time_delta — Compare two laps or sector sets and see the best theoretical lap. Calculates from measured inputs without authentication and does not read or save account data.
calculate_ethanol_blend — Calculates an ethanol blend for a fresh tank, existing fuel, correction, or ratio without authentication or account-data access. Percentages are 0–100 and all v
diagnose_handling_issue — Provides understeer/oversteer setup guidance without authentication or access to TuneWorks account data.
analyze_tire_temperatures — Interprets inside, middle, and outside tire temperature readings without authentication or access to TuneWorks account data.
recommend_autocross_damper_adjustment — Provides a bounded shock/damper adjustment recommendation without authentication or access to TuneWorks account data.
find_autocross_sites — Search the public TuneWorks Autocross Site Finder by coordinates and minimum paved-area dimensions. This may take several minutes because it queries live map an
get_tuneworks_app_capabilities — Describes TuneWorks free public capabilities and connected garage capabilities for vehicles, setups, sessions, maintenance, shop lists, Share Build, and log his
create_vehicle — Adds a vehicle to the connected user’s TuneWorks garage. Deletes are not supported.
update_vehicle — Edits an existing vehicle in the connected user’s TuneWorks garage. Deletes are not supported.
list_vehicle_modifications — List structured modifications for an accessible TuneWorks vehicle.
get_vehicle_modification — Read one structured modification from an accessible TuneWorks vehicle.
create_vehicle_modification — Create a structured modification on an editable TuneWorks vehicle.
update_vehicle_modification — Update a structured modification on an editable TuneWorks vehicle.
archive_vehicle_modification — Mark a modification canceled so it remains in vehicle history. Requires explicit confirmation.
delete_vehicle_modification — Permanently delete a vehicle modification and its files. Requires explicit confirmation.
get_garage_summary — Returns an overview of the connected user’s TuneWorks garage, including recent activity, saved vehicles, setups, sessions, maintenance, and lists.
list_vehicles — Lists vehicles saved in the connected user’s TuneWorks app garage.
get_vehicle_context — Returns one saved TuneWorks vehicle with its setup, session, maintenance, list, and log context.
list_logs — List bounded metadata for logs attached to one connected TuneWorks vehicle. Raw log samples are not returned.
get_log_context — Read bounded metadata, channel schema summary, and saved focus window for one accessible TuneWorks log. Raw log samples are not returned.
list_ai_log_tuner_transcripts — List recent AI Log Tuner conversations owned by the connected TuneWorks user. Returns conversation metadata without message contents.
get_ai_log_tuner_transcript — Read the ordered messages and saved analysis summaries for one AI Log Tuner conversation owned by the connected TuneWorks user.
list_ai_race_engineer_transcripts — List recent AI Race Engineer conversations owned by the connected TuneWorks user. May be filtered to one vehicle.
get_ai_race_engineer_transcript — Read one AI Race Engineer conversation and its ordered messages. Internal execution debug traces are not returned.
archive_vehicle — Archive a connected user vehicle using TuneWorks soft-delete behavior. Requires explicit user confirmation and never hard-deletes data.
list_setups — Lists chassis setups and setup history saved in the connected TuneWorks account.
create_setup — Saves a new TuneWorks setup for a vehicle. Deletes are not supported.
update_setup — Edits an existing TuneWorks setup revision. Deletes are not supported.
archive_setup — Archive all active revisions of a connected user setup. Requires explicit user confirmation and never hard-deletes data.
list_sessions — Lists driving sessions, events, track days, autocross runs, and session notes saved in TuneWorks.
create_session — Saves a new TuneWorks driving session. Deletes are not supported.
update_session — Edits an existing TuneWorks driving session. Deletes are not supported.
copy_session — Create an additive copy of an accessible TuneWorks driving session.
archive_session — Archive a connected user driving session. Requires explicit user confirmation and never hard-deletes data.
list_maintenance — Lists service reminders, maintenance history, due work, and completed maintenance saved in TuneWorks.
create_maintenance — Creates a TuneWorks maintenance reminder or service item. Deletes are not supported.
update_maintenance — Edits a TuneWorks maintenance reminder or service item. Deletes are not supported.
archive_maintenance — Archive a connected user maintenance item. Requires explicit user confirmation and never hard-deletes data.
list_shop_lists — Lists reusable shop lists, event prep lists, task lists, and parts lists saved in TuneWorks.
get_shop_list — Read one connected user shop list with its categories and items.
list_shop_list_items — Lists individual items and completion status in one connected user shop list, with optional filtering for open or completed items.
create_shop_list — Creates a TuneWorks shop list, task list, or parts list, optionally including categories and items.
update_shop_list — Edits shop-list metadata or replaces the full categories and items collection.
add_shop_list_category — Atomically add one category to an existing editable shop list without replacing its existing categories or items.
add_shop_list_item — Atomically add one item to an existing editable shop list without replacing existing items. If its category does not exist yet, TuneWorks creates it.
copy_shop_list — Create an editable copy of a connected user shop list with all item checks reset.
reset_shop_list_items — Reset every item in a connected user shop list to unchecked/open.
update_shop_list_item — Atomically check or uncheck one shop-list item, change its quantity, or do both.
archive_shop_list — Archive a connected user shop list so it no longer appears in active lists. Requires explicit user confirmation.
delete_shop_list — Delete a connected user shop list from active use by safely archiving it. Requires explicit user confirmation and does not hard-delete history.
get_share_build_options — Lists existing TuneWorks vehicles, setups, and sessions available for Share Build.
preview_share_build — Summarizes selected Share Build vehicle, setups, sessions, recipients, and message without sending email.
get_user_settings — Read the connected user’s preferences, unit choices, and custom vehicle makes.
update_user_preferences — Update selected preferences for the connected TuneWorks user.
update_unit_settings — Update unit-category choices for the connected TuneWorks user.
create_vehicle_make — Add a custom vehicle make to connected user settings.
update_vehicle_make — Rename or rescope a custom vehicle make.
delete_vehicle_make — Permanently delete a custom vehicle make after explicit confirmation.
list_chart_channel_sets — List saved chart-channel sets.
create_chart_channel_set — Save a named set of chart channels.
mark_chart_channel_set_used — Update the last-used time for a saved chart-channel set.
delete_chart_channel_set — Permanently delete a saved chart-channel set after explicit confirmation.
list_favorite_charts — List favorite charts for an accessible vehicle.
create_favorite_chart — Save a favorite chart for an accessible vehicle and source log.
delete_favorite_chart — Permanently delete a favorite chart after explicit confirmation.
get_vehicle_map_config — Read the saved map-channel configuration for an accessible vehicle.
save_vehicle_map_config — Create or replace the connected user’s complete map-channel configuration.
complete_maintenance — Record completed maintenance in vehicle history and advance its tracker.
list_ecu_files — List ECU-file metadata. Binary contents are never returned.
inspect_ecu_file — Inspect one authorized ECU file and optionally a decoded table. Binary contents are never returned.
process_ecu_file — Start or retry processing for an existing ECU definition file. This does not upload, create, or read a file, and processing may consume compute and analysis res
retry_ecu_file — Retry an eligible failed, already stored ECU file. MCP does not upload binaries.
delete_ecu_file — Permanently delete an authorized ECU file after explicit confirmation.
send_share_build — Emails selected TuneWorks vehicle, setup, and session details to up to three recipients. Explicit user confirmation is required.
list_teams — List teams available to the connected user, or read one team’s settings.
create_team — Create a new team for the connected user.
rename_team — Replace a team’s name.
update_team_member_role — Replace a team member’s role.
remove_team_member — Remove a member from a team after explicit confirmation.
revoke_team_invite — Revoke a pending team invitation after explicit confirmation.
leave_team — Remove the connected user from a team after explicit confirmation.
delete_team — Delete a team after explicit confirmation.
send_team_invite — Create and email a team invitation only after explicit user confirmation.
list_custom_tracks — List custom tracks accessible to the connected user.
get_custom_track — Read one accessible custom track.
create_custom_track — Create a custom track for the connected user or an editable team.
update_custom_track — Replace the editable fields and ownership scope of a custom track.
delete_custom_track — Permanently delete a custom track after explicit confirmation.
list_object_attachments — List attachment metadata for an authorized object. Binary contents are unavailable through MCP.
delete_object_attachment — Delete an object attachment from blob storage after explicit confirmation.

when	check	result	http	latency	detail
1 h ago	mcp initialize	ok	200	244 ms	server tuneworks-mcp 0.1.0 · protocol 2025-06-18 · 100 tools
8 h ago	mcp initialize	ok	200	239 ms	server tuneworks-mcp 0.1.0 · protocol 2025-06-18 · 100 tools
15 h ago	mcp initialize	ok	200	250 ms	server tuneworks-mcp 0.1.0 · protocol 2025-06-18 · 100 tools
21 h ago	mcp initialize	ok	200	233 ms	server tuneworks-mcp 0.1.0 · protocol 2025-06-18 · 100 tools
28 h ago	mcp initialize	ok	200	263 ms	server tuneworks-mcp 0.1.0 · protocol 2025-06-18 · 100 tools
2 d ago	mcp initialize	ok	200	230 ms	server tuneworks-mcp 0.1.0 · protocol 2025-06-18 · 100 tools
2 d ago	mcp initialize	ok	200	248 ms	server tuneworks-mcp 0.1.0 · protocol 2025-06-18 · 100 tools
2 d ago	mcp initialize	ok	200	217 ms	server tuneworks-mcp 0.1.0 · protocol 2025-06-18 · 100 tools
2 d ago	mcp initialize	ok	200	231 ms	server tuneworks-mcp 0.1.0 · protocol 2025-06-18 · 100 tools
3 d ago	mcp initialize	ok	200	255 ms	server tuneworks-mcp 0.1.0 · protocol 2025-06-18 · 100 tools

TuneWorks

This record is unclaimed

Evidence

What the publisher says

Capabilities

Where this record came from