Every change Wellknown observed on this MCP server, newest first, with what it was before and what it became. Tool-surface changes carry the definition diff. Nothing here is edited after the fact.
Changed the definition of "mft3_hole_pattern"
⟨106 unchanged words⟩ link that opens the size in the tool. When you present the result, link the SVG file (it is what the person cuts from), the picture and the tool. The original MFT/3 top is 1102 × 718 ⟨15 unchanged words⟩
Changed the definition of "mft3_hole_pattern"
⟨83 unchanged words⟩ link to the true-to-scale SVG for Shaper Origin/Studio, a picture of the top (a link to a 1200 × 630 PNG) and a link that opens the size in ⟨25 unchanged words⟩
Changed the definition of "french_cleat_plan"
⟨204 unchanged words⟩ cut list with cleat metres, wall coverage, a picture of the wall (a link to a 1200 × 630 PNG) and a link that opens the same plan ⟨21 unchanged words⟩
Changed the definition of "french_cleat_plan"
⟨65 unchanged words⟩ below the ceiling, lowest cleat at least450210 mm above thefloor.floor (its underside; rows 300 … 2280 on the default wall). A hanger comes off by lifting it the ⟨144 unchanged words⟩
⟨47 unchanged words⟩ must be one of the wall's rows (e.g.300, 480, 660, 840, 1020, 1200 … 2280 with default settings)","maximum":4000,"minimum ⟨231 unchanged words⟩ underside this far above the floor (default450
Changed the definition of "french_cleat_plan"
⟨69 unchanged words⟩ cleat at least 450 mm above the floor. A hanger comes off by lifting it the material + 3 mm, so the hook plate is at most the gap − 3 and the top cleat at least the hook plate + 3 below the ceiling. The default wall is a full plywood sheet, 1220 × 2440 mm. Give the wall size and the hangers to ⟨95 unchanged words⟩
⟨268 unchanged words⟩ :{"description":"Cleat board height (default90;90). The gap=equalsboard,thepitch
Changed the definition of "french_cleat_plan"
⟨170 unchanged words⟩ },"width_mm":{"description":"Width in whole mm (snapthegridplannerisdrags in 10 mm steps; thebuffer,palette30sizesmmare 50–550)","maximum":8000,"minimum":10," ⟨117 unchanged words⟩ ,"buffer_mm":{"description":"Buffer between hangers,alsoand
Changed the definition of "french_cleat_plan"
⟨30 unchanged words⟩ mm material, 30 mm buffer between hangers,rows anchoredaat900amm tableheightthatofhangs900onmmits own cleat one hook lower (thecleat topof840)
Certificate recorded, valid to 2026-11-22
Authorization not required
First tool surface recorded: 2 tools (server version 1.0.0)
Showing the latest 10 events. The API returns up to 500 and filters by kind: ?kind=tool_surface_changed
⟨48 unchanged words⟩ be one of the wall's rows (e.g.900660,1080840,12601020, 1200 … with default settings)","maximum":4000,"minimum":0,"type":"integer"},"extension_mm ⟨8 unchanged words⟩ lowest cleat, mm (default 0)","maximum":4000,"minimum":0,"type":"integer"},"name ⟨38 unchanged words⟩ pitch, 180 mm, to the panel height). Typical: hooks 0; shelves and boxes 1 (a shelf hangs on its row and rests on the cleat below); deep boxes and panels 2; tall panels 3","maximum":49,"minimum":0,"type":"integer"},"width_mm ⟨5 unchanged words⟩ grid is the buffer, 30 mm)","maximum":8000,"minimum":10,"type":"integer"},"x_mm":{"description":"Left edge, mm from the wall's left edge (x + width at most 8000, the widest wall)","maximum":7990,"minimum":0,"type":"integer"}}," ⟨134 unchanged words⟩ description":"Table height — the top of the table (default 900). The table hangs on a cleat table_offset_mm lower, and that cleat anchors the rows","maximum":2000,"minimum":0,"type":"integer"},"table_offset_mm":{"description":"How far below the table height the table's own cleat has its top edge (default90060 = hook plate − material, so the tabletop hangs like a hanger; 0 makes the table height the top of a cleat)","maximum":20001000,"minimum":0,"type":"integer"}, ⟨26 unchanged words⟩ the ceiling (default 90)","maximum":15004000,"minimum":0,"type":"integer"}} ⟨38 unchanged words⟩